PoE Injectors
PoE injectors add Power over Ethernet capability to network connections where the upstream switch does not provide PoE. They are commonly used to power individual cameras, access points, or intercom stations at remote locations or in retrofit installations where replacing the switch is not practical.
4 products in this category · installed by our business networking for security systems crew
PoE Injectors models we install
Ubiquiti
Ubiquiti U-PoE (15W)
Single-port 15W PoE injector for powering one low-power UniFi access point or IP camera when the switch has no PoE to spare.
Ubiquiti
Ubiquiti U-PoE+ (30W)
The Ubiquiti UniFi PoE+ Adapter (U-PoE+, 30W) is a single-port PoE+ injector — 48 V DC @ 0.65 A output (30 W total), gigabit LAN port, 87% efficiency. Surge / peak pulse / overcurrent protection (1500 A power, 36 A data peak pulse). 100-240 VAC input. NDAA-compliant. The Chicago go-to PoE injector for standard UniFi access points, mid-range IP cameras, and other 802.3at-class devices.
Ubiquiti
Ubiquiti U-PoE++ (60W)
60W single-port PoE++ injector that feeds a PTZ camera or high-draw UniFi access point over one cable.
Ubiquiti
Ubiquiti 10G PoE+++ (90W)
Ubiquiti's 90W PoE+++ injector with multi-gig data — for Wi-Fi 7 access points and 90W-class cameras that max out lesser adapters.
No products match your current filters.
About PoE Injectors
PoE injectors add Power over Ethernet capability to network connections where the upstream switch does not provide PoE. They are commonly used to power individual cameras, access points, or intercom stations at remote locations or in retrofit installations where replacing the switch is not practical.
Frequently Asked Questions
What PoE standard do I need?
Most IP cameras and access points use 802.3af (15W) or 802.3at (30W). PTZ cameras and high-power outdoor devices may need 802.3bt (60-90W). The injector must match or exceed the device's PoE requirement.